Dome security camera on an office corridor wall outside a boardroom

G U I D E

How Long Should Business CCTV Footage Be Kept, and How Much Storage Does It Need?

Choose a retention period first, then size the recorder to it. A worked storage table for 4 to 32 cameras, and how UniFi Protect fills, overwrites and protects its drives.

By Jarrod Lilford, Director/Owner, Kookaburra Comms · Last updated:

Most businesses should keep CCTV footage for 30 days, and for 60 to 90 days where losses are found late, such as at a monthly stocktake. A liquor licence with a CCTV condition requires at least 4 weeks. At an average of 4 Mbps per camera, recording around the clock, each camera uses 43.2 GB a day, so 16 cameras need about 20.7 TB for 30 days before headroom and RAID.

Key facts

The short version

Decide how long you need to keep footage, then size the storage to that number. Doing it the other way round, buying a recorder and accepting whatever retention it delivers, is the most common reason a business finds the footage it needs has already been overwritten.

For most businesses, 30 days is the right retention period. Sites where losses surface late, or where an insurer, licence or industry rule asks for more, keep 60 to 90 days. Storage then follows from four numbers: how many cameras, their average bitrate, how many hours a day they record, and how many days you keep.

Question Short answer
Typical retention for a business 30 days
When to keep longer Late-discovered losses, insurer or licence conditions: 60 to 90 days
Minimum for a Victorian liquor licence with a CCTV condition 4 weeks
Storage formula GB per camera per day = Mbps × 86,400 ÷ 8 ÷ 1,000
One camera at 4 Mbps, 24 hours 43.2 GB a day, 1.3 TB for 30 days
16 cameras at 4 Mbps, 30 days 20.7 TB of footage, before headroom and RAID
What UniFi Protect does when full Deletes the oldest footage to make room (automatic retention)

How long should business CCTV footage be kept?

Thirty days covers most incidents most businesses need to review. A break-in, a customer complaint, a damaged vehicle in the car park or a dispute at the counter is usually known about within days, and 30 days leaves time to find and export the footage.

Four things push the period longer.

How long it takes to discover an incident. This is the deciding factor more often than anything else. A retailer that finds stock missing at a monthly stocktake needs footage from up to five weeks earlier. A warehouse that discovers a short delivery when the customer complains a fortnight later needs the dock footage from before that. Work out the longest realistic gap between an incident and someone noticing it, then add the time it takes to review footage. If that is more than about three weeks, keep 60 days or more.

Insurance conditions. Some policies, particularly for high-value stock, cash or vehicles, set expectations for cameras and recording. Read the policy, or ask the broker, before choosing the retention period.

Licence and industry conditions. In Victoria, a liquor licence can carry a condition to install and maintain CCTV. Where it does, Liquor Control Victoria says recordings must be kept for at least 4 weeks and made available immediately to police or liquor inspectors who ask to see or remove them. Other regulated sites, such as those handling scheduled drugs or firearms, should check their own permit or licence conditions.

Privacy. Keeping footage longer is not automatically safer. Footage of identifiable people is personal information, and Australian Privacy Principle 11.2 requires a business covered by the Privacy Act to take reasonable steps to destroy or de-identify personal information once it no longer needs it for a permitted purpose. Pick a period you can justify, set the recorder to enforce it, and write it down. Business CCTV and the law in Victoria covers the wider obligations.

Type of site Usual retention Why
Office 30 days Incidents are usually noticed within days
Clinic or allied health 30 days Short discovery time; sensitive footage argues against keeping more
Retail shop 30 to 60 days Stock loss may only show at stocktake
Warehouse or distribution 60 to 90 days Delivery disputes and shrinkage surface weeks later
Licensed venue with a CCTV condition At least 4 weeks Licence condition

What decides how much storage CCTV needs?

Storage is the average bitrate of each camera, multiplied by the time it records, multiplied by the number of cameras and days. Everything else, including resolution, codec, frame rate and recording mode, matters because it changes one of those numbers.

Factor Effect on storage
Number of cameras Storage rises in direct proportion
Resolution More pixels means a higher bitrate for the same picture quality
Codec (H.264 or H.265) H.265 compresses better than H.264; the saving depends on the scene
Frame rate More frames per second means a higher bitrate
Scene activity Movement, foliage, rain and traffic raise the bitrate; a still corridor compresses well
Night and infrared Low-light noise can raise the bitrate at night
Recording mode Continuous records 24 hours; detection-only records only events
Retention period Storage rises in direct proportion to days kept

Bitrate is the number that matters. It is the amount of data the camera sends per second, usually quoted in megabits per second (Mbps). Two cameras with the same resolution can run at very different bitrates depending on the codec, the frame rate, the quality setting and what they are looking at. Plan on the average bitrate each camera actually runs at over a busy day, not the figure on a data sheet.

H.265 versus H.264. H.265 (also called HEVC) was designed to give the same picture quality as H.264 at about half the bitrate. On CCTV the real saving is usually smaller than that and depends on the scene. In UniFi Protect, Ubiquiti lists its Enhanced Encoding setting as one way to get better compression and longer retention.

Frame rate. Business cameras rarely need 30 frames per second. 15 frames per second is enough to follow movement for most security purposes, and lowering the frame rate lowers the bitrate. For licensed venues with a CCTV condition, Liquor Control Victoria’s guidance asks for 8 frames per second or more.

Continuous or detection-only. UniFi Protect offers three recording modes per camera: Always, Detection Only and Never. Detection Only, with a few seconds of pre-event and post-event buffer, can cut storage sharply on quiet cameras. Keep continuous recording on cameras where you can’t afford to miss anything, such as entrances, tills and the cash office, because detection can miss a slow or partly hidden event.

The storage formula

Every figure in this guide uses one formula, so you can check it or rerun it with your own numbers:

GB per camera per day = average bitrate (Mbps) × 86,400 seconds ÷ 8 bits per byte ÷ 1,000 megabytes per gigabyte

That works out to 10.8 GB a day for every 1 Mbps of average bitrate, recording 24 hours. Multiply by the number of cameras and the days kept, then divide by 1,000 for terabytes. The table uses decimal units (1 TB = 1,000 GB), which is how drive capacities are labelled.

Average bitrate per camera GB per camera per day TB per camera for 30 days
1 Mbps 10.8 0.32
2 Mbps 21.6 0.65
4 Mbps 43.2 1.30
6 Mbps 64.8 1.94
8 Mbps 86.4 2.59
12 Mbps 129.6 3.89
16 Mbps 172.8 5.18

CCTV storage table: 4 to 32 cameras at 30, 60 and 90 days

Assumptions: every camera averages 4 Mbps and records continuously, 24 hours a day. That is 43.2 GB per camera per day. The figures are footage only, before headroom and before the capacity RAID uses. They are a planning example, not a measurement of any particular camera; if your cameras average 8 Mbps, double every figure, and at 2 Mbps halve them.

Cameras GB per day (all cameras) 30 days 60 days 90 days
4 172.8 5.2 TB 10.4 TB 15.6 TB
8 345.6 10.4 TB 20.7 TB 31.1 TB
16 691.2 20.7 TB 41.5 TB 62.2 TB
32 1,382.4 41.5 TB 82.9 TB 124.4 TB

Checking one row: 16 cameras × 43.2 GB = 691.2 GB a day; × 30 days = 20,736 GB, or 20.7 TB.

Detection-only recording changes the hours, not the formula. A camera at 4 Mbps that records 6 hours of events a day writes 43.2 × 6 ÷ 24 = 10.8 GB a day. Most real systems mix the two: continuous on the entrances and tills, detection-only on the yard, corridors and store rooms.

How UniFi Protect records and stores footage

UniFi Protect records to hard drives or SSDs inside the UniFi console or network video recorder (NVR) on site, not to a cloud subscription. Retention is therefore limited by the drives you install.

When the drives are full. With automatic retention, Protect fills the drives and then deletes the oldest recordings to make room. Recording doesn’t stop, but the number of days you can look back is whatever fits. Protect also lets you set retention per camera, so a less important camera can keep fewer days and leave more space for the entrances.

Enhanced Retention. From Protect 5.1, Enhanced Retention keeps recent footage at full quality for a period you choose, such as 30 days, then downgrades older footage to low quality before it is deleted at the end of the final retention period. Downgraded footage can’t be restored to full quality. It suits sites that need a long look-back but only need detail for recent events.

Keeping footage beyond the retention period. Ubiquiti lists three ways: flag a clip to stop it being downgraded, export or archive it to external storage, or keep it in Case Manager. Do one of these as soon as an incident is known about.

Drive redundancy. Multi-bay UniFi NVRs combine drives in RAID so that a failed drive doesn’t lose footage. Ubiquiti’s Basic Protection uses RAID 1 for two drives and RAID 5 for three or more, and protects against one drive failing. Its larger enterprise NVR can use RAID 6 with nine or more drives, which survives two failures. Better Performance uses RAID 10 on an even number of drives. All of them use capacity:

Ubiquiti protection option RAID level Survives Usable share of raw capacity
Basic Protection RAID 1 (2 drives) or RAID 5 (3 or more) 1 drive failure 67% to 75% with RAID 5
Advanced Protection RAID 6 (enterprise NVR, 9 or more drives) 2 drive failures 78% to 87%
Better Performance RAID 10 (even number, at least 4) Up to half the drives, one per mirrored pair 50%

Ubiquiti also notes that every drive in a RAID group must be the same size; a larger drive added to an array of smaller ones only contributes the smaller capacity until all of them are replaced. Single-bay consoles have no redundancy, so a drive failure loses the footage on it.

Recording drives work continuously and wear out. Ubiquiti recommends CMR drives at 7200 RPM for multi-bay consoles running RAID 5, 6 or 10. Plan for drive replacement over the life of the system.

How much headroom to allow

Size for at least 20% more storage than the table gives, then add the RAID overhead on top. Three things eat into the margin:

Worked example: 16 cameras at 4 Mbps for 30 days is 20.7 TB of footage. With 20% headroom that is about 24.9 TB. In RAID 5 with four equal drives, 75% of raw capacity is usable, so the drives need about 33 TB raw between them. After installation, check how many days the system is actually holding against the target, and check it again a month later.

Exporting footage for police and insurers

Footage is only useful if it is still there and can be shown to be genuine.

  1. Act fast. Export the relevant clips as soon as the incident is known, before rolling retention deletes them.
  2. Check the clock. Confirm the recorder’s time is correct and note any offset. Time synchronisation should be set up at installation.
  3. Export the original. Keep the exported file unedited. Make copies for police, the insurer or a lawyer, rather than giving anyone access to the recorder.
  4. Write it down. Record the camera name, date, time range, who exported it, and who received copies and when.
  5. Keep it only as long as needed. Once the matter is closed, delete exported copies in line with the retention policy.

Whether you may share footage at all, and with whom, is a legal question as well as a technical one. Business CCTV and the law in Victoria covers sharing footage with police.

A sizing checklist before you ask for a quote

The number of cameras comes first. How many security cameras a business needs covers the count and positions, and UniFi Protect versus a traditional NVR covers the recorder choice. When you’re ready, security systems and cameras starts with a site walkthrough and a quote sized to the retention you need.

Frequently asked questions

How long should a business keep CCTV footage?
30 days suits most businesses. Keep 60 to 90 days where incidents are found late, for example stock losses picked up at a monthly stocktake, and follow any longer period an insurer, licence or industry rule sets. Don't keep footage longer than the business needs it: a business covered by the Privacy Act must take reasonable steps to destroy or de-identify personal information it no longer needs.
How many terabytes do 16 cameras need for 30 days?
About 20.7 TB of footage if each camera averages 4 Mbps and records around the clock: 4 × 86,400 ÷ 8 ÷ 1,000 = 43.2 GB per camera per day, × 16 cameras × 30 days = 20,736 GB. Add at least 20% headroom, then allow for the capacity RAID uses, so the drives need to provide roughly 25 TB of usable space.
Does detection-only recording save storage?
Yes, in proportion to how quiet the scene is. A camera that records 6 hours of events a day instead of 24 hours uses about a quarter of the storage. A busy entrance saves little. Size the system on the busiest cameras and the busiest weeks, not the quiet ones.
What happens when UniFi Protect runs out of storage?
With automatic retention, Protect keeps recording and deletes the oldest footage to make room, so the drives decide how many days you actually have. To keep a fixed period, size the drives for it and set retention to match. Footage you need to keep beyond that period should be flagged, exported or moved to Case Manager before it ages out.
Does RAID reduce how much footage we can keep?
Yes. RAID trades capacity for protection against a failed drive. Ubiquiti's Basic Protection (RAID 5 on three or more drives) leaves about 67% to 75% of raw capacity usable, and RAID 10 leaves 50%. Size retention on usable capacity, not the total printed on the drives.
How do we give CCTV footage to police or an insurer?
Export the clip from the recorder as soon as you know about the incident, before automatic retention deletes it. Check the camera clock is correct, note the camera name, date and time range, record who received a copy and when, and keep the original export. Give police or the insurer a copy rather than access to the recorder.

Related services

Related guides

Sources

Need help applying this to your business?

Talk to Kookaburra Comms about how to put this into practice in your environment. Call 03 9008 4199 or send a message.

GET A FREE QUOTE
Call 03 9008 4199Free quote